Clarion CX609 User Manual

Operations Common to Each Mode
English
23 CX609
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [ ] button (2 sec.) to
store the message in memory.
∗ Press and hold the [BND] button (1 sec.) to
cancel the input message. Then press and
hold the the [ ] button (2 sec.) to store the
message and the message return to default
setting.
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
•ON:
To scroll automatically.
•OFF:
To scroll just 1 time.
∗ When you want to see the title again, in the
title mode, press and hold the [DISP] button
for 3 seconds or longer to scroll the title.
● Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
● Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the ACC is off, this
indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “BLINKLED”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
● Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “A-CANCEL”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
•ON:
Use with connected AMP.
•OFF:
Use with inside AMP.
● Selecting Rear or Subwoofer
∗ The factory default setting is “REAR”.
2-1. Select “REAR/S-W”.
3-1. Press the [w] or [z] button to select
“REAR” or “S-WOOFER”.
● Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “SYSTEM CHECK”.
3-1. Press and hold the [ ] button (1 sec.).
“SYSTEM CHECK” appears in the display,
then the unit returns to the previous
operation mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations. The number of titles that can be
entered for each mode are as follows.
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer).
2. Select and play a CD in the CD changer or
tune in Radio for which you want to enter the
title.
3. Press and hold the [DISP] button (1 sec.).
4. Press the [x] or [v] button to select
“TITLE INPUT”.
5. Press the [ ] button.
The display switches to the title input display.
6. Press the [x] or [v] button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters…
8. Press the [w] or [z] button to select the
desired character.
9. Repeat steps 6 to 8 to enter u
p to 10
characters for the title.
Mode Number of titles
CD mode 50 titles
Radio mode 30 titles
CD changer mode Number of titles
DCZ625 connected 100 titles
CX609_ENG.book Page 23 Tuesday, January 13, 2009 10:52 AM

Clarion CX609 Specifications

General

Brand	Clarion
Model	CX609
Category	Car Receiver
Language	English