Clarion DB355MP User Manual

I
Radio Mode Operations
FM reception
For enhanced FM performance the MfiGI-TUNE®
tuner includes signal actuated stereo control and
multipath noise reduction circuits.
Listening to the radio
1. Press the [SRC] button and select the radio
mode. then the radio will be on.
2.
To select a preset band, press the [BND] but-
ton, then select one of the preset bands such
as FM1, FM2,
FM3 or AM. Every time the
[BND] button is pressed, the display will
change as:
F1 ~F2 ~F3 ~AM ~F1 ...
3. Press the
[< ... ] or [..->] button to tune in the
desired station.
Manual tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the
[BND] button for 1 second
or longer, then the "MANU" is lit in the display,
which means that a manual selection function
is on.
3. Press the
[< .... ] or [..-> ]button to manually tune
in a station.
Seek tuning
1. Press the [BND] button to select the desired
band FM
1, FM2, FM3 or AM.
2. If the "MANU" is lit in the display, press and
hold the
[BND] button for 1 second or longer.
When the "MANU" display is off, the seek tun-
ing is now available.
3. Press the [< ...] or [..->] button to automatically
seek in a station.
Preset memory function
Preset memory function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3 and
AM.
12 DB355MP
Manual memory function
1. Press the [BND] button, to select a band you
want to store
in the memory.
2. Press the
[< ... ] or [..->] button to tune into a
desired station.
3. Press and hold one of the [DIRECT] button for
2 seconds or longer to store the current sta-
tion into preset memory.
Auto store function
(Automatic Station Store)
1. Press [BND] button to select the desired band
FM1, FM2, FM3 or AM.
2. Press and hold the [
.. II] button for 1 second
or longer. The stations
at which the reception
is the strongest will be automatically stored in
the memory.
Notes:
• When the auto store is performed, the station pre"
viously store
in the memory at that position is over-
written.
• When the number of stations stored is less than
six, the previous content of the memory for each
direct button will
be retained.
Preset scanning
(Preset Station Scan)
When the [ "II ]button is pressed, the "SCN" will
be indicated with preset memory numbers and the
stations are tuned
in for 7 seconds each in the
order
in which they were stored. Press the [ .. II]
button again to cancel the preset scanning mode.
Instant station recall (ISR)
With this function, a specific radio station can be
recalled from any mode.
ISR
memory
1. Press the [SRC] button, then select the radio
mode.
2. Select the radio station which you want to store
in the memory.
3. Press and hold the [lSR] button for 2 seconds
or longer.
Recalling ISR
Press the [ISR] button and the display will show
"ISR". Then the radio station previously memo-
rized will be selected. Press the [lSR] button again
to disengage the unit from the Recalling ISR func-
tion.

Clarion DB355MP Specifications

General

Brand	Clarion
Model	DB355MP
Category	Car Receiver
Language	English