DCP
DCP case
• The
DCP
can easily be damaged
by
shocks.
After removing it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• When the Release
button
is
pressed and the
DCP
is
unlocked, the car's vibrations may
cause
it
to
fall. To prevent damage
to
the
DCP, always store
it
in
its
case after detach-
ing it. (See
figure
above.)
• The
connector
connecting the main
unit
and
the DCP
is
an extremely important part. Be
careful
not
to
damage
it
by
pressing on
it
with fingernails, pens, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off.the dirt with a soft, dry
cloth only.
Storing
the
DCP in the DCP case
Hold the DCP,
in
the orientation
as
shown
in
the
figure below, and put
it
into the supplied
DCP
case.
(Ensure the DCP
is
in
the correct orientation.)
*The DCP is unlocked
3.
Remove the DCP.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the DCP (Detachable Control Panel) case
to
prevent scratches.
We recommend taking the
DCP
with you when
leaving the car.
Removing
the
DCP
1.
Press the [SRC] button for 1 second or longer
to
switch off the power.
2.
Press
in
the [RELEASE] button.
i
[RELEASE]
button
~
J
IGJ
~
Attaching
the
DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP into the main
unit.
DB355MP 7
To Next Page
Loading...
Need help?
General
