11
English
DB568RUSB
5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP
(
Detachable Control Panel
)
case to
prevent scratches.
We recommend taking the DCP with you when
leaving the car.
3. Pull the DCP towards you and remove it.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP to attach into
the main unit.
The DCP can easily be damaged by impact.
After removing it, be careful not to drop it
or subject it to strong shocks.
If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This may result in damage to the DCP. So
close the FLIP DOWN PANEL or remove the
DCP and store in the case.
The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
CAUTION
!
Removing the DCP
1. Press the
[
SRC
]
button for 1 second or longer
to switch off the power.
2. Press in the
[
RELEASE
]
button.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
∗ The DCP is unlocked.
Storing the DCP in the DCP case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case.
(
Ensure the DCP is in the correct orienta
-
tion.
)
To Next Page
Loading...
Need help?
General
