Clarion DB568RUSB User Manual

13
English
DB568RUSB
“Z-EHCR OFF” “Z-EHCR 1” “Z-EHCR 2”
“Z-EHCR 3” “Z-EHCR OFF” ...
Z-EHCR 1 : bass emphasized
Z-EHCR 2 : treble emphasized
Z-EHCR 3 : bass and treble emphasized
Z-EHCR OFF : no sound effect
Basic Operations
Adjusting the balance
1. Press the
[
A-M
]
button and select “BAL 0”.
2. Turning the
[
ROTARY
]
knob clockwise empha
-
sizes the sound from the right speaker; turning
it counterclockwise emphasizes the sound from
the left speaker.
∗ The factory default setting is “BAL 0”.
(
Adjustment range: L13 to R13
)
3. When the adjustment is complete, press the
[
A-M
]
button several times until the Function
mode is reached.
Adjusting the fader
1. Press the
[
A-M
]
button and select “FAD 0”.
2. Turning the
[
ROTARY
]
knob clockwise em
-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗ The factory default setting is “FAD 0”.
(
Adjustment range: F12 to R12
)
3. When the adjustment is complete, press the
[
A-M
]
button several times until the Function
mode is reached.
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
∗ The factory default setting is off.
1. Press and hold the
[
A-M
]
button for 1 second or
longer to turn on the MAGNA BASS EX effect.
“M-B EX” lights in the display.
2. Press and hold the
[
A-M
]
button for 1 second or
longer to turn off the MAGNA BASS EX effect.
“M-B EX” goes off from the display.
Setting the Z-Enhancer
This unit is provided with 3 types of sound tone
effects stored in memory. Select the one you pre-
fer.
∗ The factory default setting is “Z-EHCR OFF”.
Each time you press the
[
Z
]
button, the tone ef
-
fect changes in the following order:
CT
(
Clock Time
)
function
The CT function receives CT data sent from an
RDS station and displays the time. Press the
[
D
]
button to switch to the CT display.
∗ If a CT data is not being received, “CT--:--” appears
in the display.
Note:
CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
AUX function
This system has external input jacks so you can
listen to sounds and music from external devices
connected to this unit.
1. Press the
[
SRC
]
button and select the AUX
mode to activate the AUX function.

Clarion DB568RUSB Specifications

General

Brand	Clarion
Model	DB568RUSB
Category	Car Receiver
Language	English