Basic Operations
Adjusting the Beat EQ
1 Press BEQ button II] and select the Beat EQ
mode
(1
to
3)
to adjust
2 Press A-M button
[g] and select "BEQ"
3 Turning the Rotary knob
!HJ
clockwise adjusts
in
the + direction; turning it counterclockwise
adjusts in the - direction
*When 1 BASS BOOST is selected, you can ad-
just the bass
in
the range of
±3
*When 2 IMPACT is selected, you can adjust the
treble
in
the range of
±3
*When 3 EXCITE is selected, you can adjust the
bass and treble
in
the range of
±3
4 When the adjustment is complete, press A-M
button
[g] several times until the function mode
is reached
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect
1 Press and hold LOUD button
[g] for 1 second
or
longerto turn on the loudness effect When
the loudness effect is turned on,
"LO"
lights in
the display
2 Press and hold LOUD button
[g] for 1 second
or
longer to turn off the loudness effect
"LO"
goes off in the display
12
DXZ615
Radio Operations
FM
reception
For enhanced
FM
performance the
mRIiI=TUNEC::=
®
tuner includes signal actuated stereo control, En-
hanced Multi AGC, Impulse noise reduction curcuits
and Multipath noise reduction circuits
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHzfor AM and 200kHz for FM When using it
outside the USA, the frequency reception range
can be switched to the intervals below
• Setting the reception area
1 Press BND button
[IT]
and select the desired
radio band (FM
or
AM)
2 While pressing DISP button
11m,
each time you
press and hold the number "6" of the Preset
buttons
00
for 2 seconds or longer, the recep-
tion area switches from inside the USA to out-
side the USA or from outside the USA to in-
side the USA
*Any station preset memories are lost when the
reception area is changed
Listening to the radio
1 Press FNC button
~
and select the radio
mode
2 Press BND button
[IT]
and select the radio
band Each time the button is pressed, the
radio reception band changes in the follow-
ing order:
FM1
..
FM2
..
FM3
..
AM"
FM1
3 Press the right
or
left side of SEARCH button
!HJ
to tune in the desired station
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning
Seek tuning
1 Press BND button
[IT]
and select the desired
band (FM
or
AM)
* If "MANU" is lit in the display, press and hold
BND button
ITIJ
for 1 second or longer "MANU"
in
the display goes off and seek tuning is now
available
2 Press the right
or
left side of SEARCH button
[j]]
to automatically seek a station
When the right side of SEARCH button
[j]]
is
pressed, the station is sought in the direction
of
higher
frequencies;
if
the
left
side
of
SEARCH button
[j]]
is pressed, the station is
sought in the direction of lower frequencies
To Next Page
Loading...
Need help?
General
