Note:
Be
sure
to
read this chapter referring
to
the front diagrams
of
chapter
"3
CONTROLS"on page 5 (unfold)
Digital Radio / DAB Operations
DAB
control
function
When a CeNET cable is used to connect a DAB
(sold separetely), all functions can be operated
Listening
to
the DAB
station
1 Press FNC button
[]]
to select DAB mode
2 When the unit receives a DAB station, the
display changes in the following order
Frequency channel
~
service label
It1l
It'll
Switching
displays
Press the DISP button
[IQJ
for 1 second during
the Main (service label) display to select Main
(service label) or Sub (PTY)
Note:
• The display shown in the normal reception mode
and
the
preset
reception mode is the same when
a DAB station is received
3 When the unit does not receive a DAB sta-
tion, the display changes in the following or-
der
-Normal
reception
mode-
It1l LE
ch
-Preset
reception
mode-
I~ll
till
-LE
-~.
1._-
I I
Notes:
• The
number
of
programmes
and
broadcasting
times depend on the DAB stations
• When the strength
of
DAB signals is weak, audio
output is muted
26
DXZ615
Seek
tuning
1 Press FNC button
[]]
to select DAB mode
2 Press and hold right or left for 1 second or
longer using SEARCH button
II§]
It'll
SEEk:
*"SEEK" appears
in
the display
3 "DAB" lights up
in
the display when the main
unit receives a DAB station
*The main unit stops the seek tuning
when
it
cannot find a
DAB
station The display returns
to
the previous
mode
Manual
tuning
1 Press FNC button
[]]
to select DAB mode
2 Press and hold BND button
[IT]
for 1 second or
longer "MANU" lights up
in
the display
3 Press the right or left SEARCH button
II§]
to
select a station
*
If
no
operation
is
performed for more than 7
seconds, manual tuning
is
cancelled
and
the
display returns
to
the previous
mode
Switching
programmes
1 Press FNC button
[]]
to receive a DAB sta-
tion
2 Press the right or left SEARCH button
~
to
switch programmes
in
the DAB station
Note:
• The programme name maybe the same depending
on DAB programmes
Programme scan
This function scans through each receivable pro-
gramme
in
a DAB station being received for 10
seconds sequentially This is useful when you
want to search for a desired programme
1 Press FNC button
[1J
to receive a
DAB
station
2 Perform the following operation depending
on
the connected model
Press SCN button
[!]
"SCAN" lights up and
the unit starts scanning each programme for
10 seconds sequentially Each time the main
unit scans, the programme name is shown
in
the display
3
To
stop programme scan when a desired pro-
gramme is tuned
in
Press SCN button
[!]
To Next Page
Loading...
Need help?
General
