AC
Processor Operations
OSP
control
function
If the DSP (DPH913), sold separately, is con-
nected to this unit using the CeNET cable, all
functions of the
AC
Processor can be controlled
DSF
functions
There are 2 modes available
in
DPH913, STD
mode and professional mode Choose one of
them and adjust the sound field and the sound
quality
•
Functions
common
to
each mode:
Auto loudness, etc
• Standard mode:
Adjustment using the graphic equalizer function
and the DSF function
• Professional mode:
Adjustment using the VSE function and the para-
metric equalizer function
*When the STD mode is selected, adjustment for
the professional mode cannot be made On the
contrary, when the professional mode is selected,
adjustment for the STD mode cannot be made
*
For
details
on
functions
of
each mode, refer
to
the
owner's
manual
supplied
with
the OPH913
*Hereafter the graphic equalizer is referred to as a
G EO, the space equalizer referred to as VSE and
the parametric equalizer referred to as P.EO
Operations common
to
each
mode
Outputadjustment
of
auto loudness,
subwoofer
and
playback
band
1 Press and hold ADJ button
l1J
for 1 second or
longer to switch to the adjustment selection
display
2 Press the right or left side of SEARCH button
I1ID
to select "SOUND"
3 Press ENT button
!j]]
4 Press the right or left side of SEARCH button
I1ID
to select the adjustment item
There are "A
LO
LEVEL", "WOOFER OUT",
"WOOFER LPF", "HPF" and "TEST TONE"
available for the adjustment items
*
For
details
on
each adjustment item, refer
to
the
owner's manual supplied with the DPH913
5
Turn
the Rotary knob
lH]
clockwise or coun-
terclockwise to make the adjustment
6 Pressing ENT button
!j]] returns to the adjust-
ment selection display
7 Press ADJ button
[gJ
to return
to
the previous
mode
22
DXZ615
Selecting the easy
mode
or
the
professional
mode
*The factory default setting is "STO"
1 Press and hold ADJ button
l1J
for 1 second or
longer to switch to the adjustment selection
display
2 Press the right or left side of SEARCH button
I1ID
to select "AC-P SEL"
3 Turn the Rotary knob
lH]
clockwise or coun-
terclockwise to set the mode to "STO" or
"PRO"
4 Press ADJ button
l1J
to return to the previous
mode
Entering
titles
You
can give a title to the user memory of the
DSF,
G
EO,
VSE and
P.EO
that
you
have adjusted
yourself
1 Press A-M button
[jl] to select the adjustment
mode
in
which you want to give a title
2 Press BND button
ff1]
to select "USR" "USR"
will be displayed
in
the function mode indica-
tion
1m
3 Press one of Preset buttons
[[]
to select the
user memory to which you want to give a title
4 Press TITLE button
l1J
5 Press the right or left side of SEARCH button
I1ID
to move the cursor
6 Press DISP button
[Q]
to select the character
fonts
There are capital letters, small letters, num-
bers, symbols and umlaut available for the
character
7 Turn the Rotary knob
[H]
clockwise or counter-
clockwise to select the character you want to
input
8 Repeat steps 5 to 7 to input the title
9 Press and hold ENT button
!j]] for 2 seconds
or longer to put the title into memory The title
input mode is cancelled
STD mode/G.EQ
operations
Note:
•
The
adjustment made in standard mode
is
not re-
flected in the adjustment in professional mode On
the contrary, the adjustment made
in
professional
mode is
not
reflected in the adjustment
in
easy
mode
To Next Page
Loading...
Need help?
General
