If
an
error occurs, one of the following displays is displayed
Take
the measures described below to eliminate the problem
A CD is loaded upside-down inside the CD Eject the disc then reload it properly
deck and does not play
A CD is caught inside the CD deck and is
not ejected
A CD cannot be played due to scratches,
etc
A CD inside the CD changer is not loaded
A CD inside the CD changer cannot be
played due to scratches, etc
A CD inside the CD changer cannot be
played because it is loaded upside-down
Displayed when the temperature
in
the MD
changer is too high and playback has
been stopped automatically
An
MD inside the
MD
changer
is
not loaded
An MD inside the MD changer cannot be
played due to scratches, etc
An MD inside the MD changer cannot be
played because it is loaded upside-down
Displayed when a non-recorded MD is
loaded
in
the MD changer
This is a failure of CD deck's mechanism
and consult your store of purchase
Replace with a non-scratched,
non-warped disc
This is a failure of CD changer's mecha-
nism and consult your store of purchase
Replace with a non-scratched, non-warped
disc
Eject the disc then reload it properly
Lower the surrounding temperature and
wait for a while to cool off MD changer
This is a failure of MD changer's mecha-
nism and consult your store of purchase
Replace with a non-scratched, non-warped
disc
Eject the disc then reload it properly
Load a pre-recorded MD
in
the MD
changer
If an error display other than the ones described above appears, press the reset button If the problem
persists, turn off the power and consult your store of purchase
32
DXZ615