The control panel can
be
detached to prevent theft When detaching the control panel, store it
in
the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches
We
recommend taking the DCP with you when reaving the car
Removing the DCP
1 Hold down POWER button
rn
for 1 second
or longer
to
turn off the power
2 Deeply push
in
OPEN button
ITJ
to unlock
the FLIP DOWN PANEL
* If the FLIP DOWN PANEL does not open fully,
gently open it with your hand
Flip down panel
3 Pull the DCP toward
you
and remove it
4 Close the HOLD FLAP
HOLD FLAP
Be
sure
to
close
the
HOLD FLAP
for
safety
when removing
the
DCP
Attaching
the DCP
1 Insert the right side of the DCP into the source
unit
2 Insert the left side of the DCP into the source
unit
• The DCP can easily be damaged by
shocks
After
removing it, be careful
not
to
drop
it
or
~ubject
it
to
strong
shocks
• If
the
FLIP
DOWN
PANEL
is
kept open, the
DCP may
drop
due
to
vibration
of
the
car
This
results
in damage
to
the
DCP So close
the
FLIP
DOWN
PANEL
or
remove
the
DCP
to
store
into
the
case
• The
connector
connecting
the
source
unit
and the DCP
is
an extremely
important
part
Be careful
not
to
damage
it
by
pressing
on
it
with
fingernails,
screwdrivers,
etc
Note:
•
If
the DCP is dirty, wipe
off
the
dirt
with a soft,
dry
cloth only.
nX1615
7
To Next Page
Loading...
Need help?
General
