Manual
memory
The
main unit has a manual
memory
function
for DAB
programmes
Up to 18
programmes
(6 programmes each) can be preset in the pre-
set
buttons
[M1], [M2] and [M3]
1 Press FNC button
[j] to select DAB mode
2 Press BND button
[ill to select
anyone
shown
above
3 Press the right or left SEARCH button
[j]
to
select a desired programme
4 Press and hold one of Preset buttons
(1
to
6)
[[]
for 2 seconds or longer
to
store the programme
Note:
•
The
interrupt programme (PTY
or
INFO) cannot
be written into
a manual memory.
Recalling a
preset
programme
1 Press FNC button [j] to select DAB mode
2 Press BND button
[ill Each time you press
BND button
[1],
the display changes in the fol-
lowing order:
[M1]
~
[M2]
~
[M3]
~
[M1]
3 Press one of Preset buttons
[[]
to recall a
preset programme
Note:
• Press and hold Preset button
fiJ
for 2 seconds
or
longer
to
store the programme currently being re-
ceived (Manual memory)
AFfunction
The AF function switches to a different frequency
on
the same network
in
order to maintain opti-
mum reception
*The factory default setting
is
"ON"
*
If
the reception
of
the
current broadcast station
deteriorates,
"SEARCHING FOR SAME STATION"
or
"SEARCH"
appears
in
the display
and
the
radio
searches
for
the
same
programme
on
another fre-
quency
•
Switching
OFF
the
AF
function
•
Switching
ON
the
AF
function
• AF
function
between RDS and DAB
When the same programme is broadcast by both
RDS and DAB, and this function is ON, the main
unit switches to receiving the broadcast with the
better reception automatically
Digital
Radio / DAB Operations
INFO (Announcement)
In
INFO
standby
mode,
when
the
selected
announcement programme starts, the main unit
switches to the selected announcement pro-
gramme automatically
•
Setting
INFO
standby
mode
If you press and hold ISR button
[ID
for 1 second
or longer,
"INFO" lights
in
the display and the main
unit is set into INFO standby mode until the se-
lected announcement is broadcast When the
selected announcement broadcast starts, the
announcement item appears in the display If you
press and hold ISR button
[ID
for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into INFO standby mode
• Cancelling INFO
standby
mode
To
cancel INFO standby mode, press and hold
ISR button
[ID
for 1 second or longer
•
Information
select
This is a function for selecting INFORMATION
ON or OFF
in
Information interrupt mode
You
9an set ON up to 6 information items
You
can select any of the 6 items below
INFORMATION item
ENGLISH
Contents
TRAVEL
TRANSPORT FLASH
WARNING WARNING / SERVICE
NEWS NEWS FLASH
WEATHER AREA WEATHER FLASH
EVENT
EVENT ANNOUNCEMENT
SPECIAL SPECIAL EVENT
Perform the following operation depending on
the connected model
Press and hold ADJ button
~
for 1 second or
longer
2 Press the right or left SEARCH button
[j]
to
select
"INFO SEL", then push ENT button [jl]
to enter "INFO SEL" mode
3 Press the right or left SEARCH button
~
to
select an information item
You
can select any
of 6 items
OXZ615
27
To Next Page
Loading...
Need help?
General
