Digital Radio / DAB Operations
4 Perform the following operation depending on
the connected model
Turn
the
Rotary
knob
[H]
clockwise
or
counterclock wise to set the information item
for ON
or
OFF
5 Press ADJ button
~
to return to the previous
display
Switching the
PTYand
INFO display
language
You
can select one of 2 languages (English
or
French) for the PTY and INFO shown
in
the dis-
play
*The factory default setting
is
"English"
TA
(Traffic
Announcement)
In
TA
standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function
mode
so
you can listen to it Traffic
programme (TP) automatic tuning is also possible
*This function can only
be
used when
"TP"
is lit
in
the display When
"TP"
is lit, this means that the
RDS
broadcast station being received has Vaffic
announcement programmes
• Setting
TA
standby
mode
If
you
press
ISR
button
rID
when only
l'TP"
is
lit
in
the
display,
"TP"
and
"TA"
light
in
the display and the unit
is
set into
TA
standby mode until a traffic announce-
ment
is
broadcast When a traffic announcement
broadcast starts, "TRA INFO" appears
in
the display
If
you
press
ISR
button
rID
while a traffic announce-
ment broadcast
is
being
received,
the
traffic announce-
ment broadcast reception
is
cancelled and the unit
goes into
TA
standby mode
• CancellingTA
standby
mode
With "TP" and "TA" lit in the display, press ISR
button
00
The "TA" in the display goes off and
TA
standby mode is cancelled
*
If
"TP"
is not lit, pressing ISR button
[ID
searches
for a
TP
station
• Searching
for
a TP
station
When "TP" is not lit, if you press ISR button
00,
"TA" in the display lights and the unit automati-
cally receives a
TP
station
Note:
•
If
a
TP
station
is
not
received,
the
unit continues
the
search operation Pressing ISR button [1]again goes
off
"TA"
in
the
display andstops
TP
station searching
28
DXZ615
Auto
store
function
for
TP
stations
You
can automatically store
up
to 6TP stations into
preset memory
If
the number of TP that can
be
re-
ceived is less than
6,
broadcast stations already
stored
in
memory are left without being overwritten
With
"TA"
lit
in
the
display,
press
and
hold
AS
button
~
for
2 seconds
or
longer
The
TP
stations
with
the
good
reception
sensitivity
are
stored
into
preset memory
*
Even
if
you
select
FM
1 or
FM2,
a
TP
station
is
stored into memory for FM3
PTY
This function enables you to listen to a broadcast
of the selected programme type when it starts even
if the unit is on a function mode other than radio
*Some countries do not yet have PTY broadcast
*
In
TA
standby mode, a
TP
station has priority over
a PTY broadcast station
•
Setting
PTY
standby
mode
When you press RDM button [§], "PTY" lights
in
the display and the PTY standby mode is turned
on When the selected PTY broadcast starts, the
PTY item name appears
in
the display
• Cancelling PTY
standby
mode
When you press and hold RDM button [§] for 1
second
or
longer, "PTY" goes off
in
the display
and PTY standby mode is cancelled
• Cancelling a PTY
interrupt
broadcast
Press RDM button [§] during the PTY interrupt
broadcast, the PTY interrupt is cancelled and the
unit returns to PTY standby mode
Selecting PTY
1 When you press RDM button [§], the unit goes
into PTY select mode
2 Press
anyone
of Preset buttons
00
Alterna-
tively, turn the Rotary knob
[H]
clockwise
or
counterclockwise to select the desired PTY
* Below are the factory default settings stored
for Preset buttons
[ID
Preset
PTY
item
number
ENGLISH
Contents
1
NEWS
News
2
TOP
40
Top
40
3
COUNTRY
Country music
4
SOFT
Soft music
5
CLASSICL
Classical
6
R&B
Rhythm and Blues
To Next Page
Loading...
Need help?
General
