Clarion DXZ938R User Manual

DXZ938R 27
English
CD/MD/DVD changer functions
When an optional CD/MD/DVD changer is con-
nected through the CeNET cable, this unit con-
trols all CD/MD/DVD changer functions. This unit
can control a total of 2 changers (CD/MD/DVD).
Press the [FNC] button and select the CD/MD/
DVD changer mode to start play. If 2 changers
are connected, press the [FNC] button to select
the CD/MD/DVD changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the changer. “LOADING” appears
in the display while the player loads (checks) the
magazine.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the changer.
CD/MD/DVD Changer Operations
7.OPERATIONS OF ACCESSORIES
CAUTION
CD-ROM discs and CD-R discs cannot be
played in the CD changer.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2.
To resume play, press the [ ] button again.
Selecting a DISC
Each [DIRECT] button corresponds to a disc
loaded into the magazine.
●Selecting a disc from 1 to 6
Press the corresponding [DIRECT] button (1 to
6) to select the desired disc.
●Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold the [DIRECT] button (1 to 6) for
1 second or longer to select the desired disc.
∗ If a CD is not loaded in a slot of magazine, pressing
the [DIRECT] button corresponding to its disc num-
ber is invalid.
Selecting a track
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
Top function
The top function plays from the first track of the
disc.
●When playing a disc 1 to 6
Press the [DIRECT] button (1 to 6) with the
same number as the CD playing.
●When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold for 1 second or longer the [DI-
RECT] button (1 to 6) with the same number as
the CD playing.
∗ If a CD is not loaded in a slot of magazine, pressing
the [DIRECT] button corresponding to its disc num-
ber is invalid.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This func-
tion continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [P/A] button to start track scan-
ning. “SCN” lights in the display.
2. To cancel the scan play, press the [P/A] but-
ton again. “SCN” goes off from the display
and the current track continues to play.

Clarion DXZ938R Specifications

Radio Specifications

FM receiving frequency range	87.5 to 108 MHz (0.05 MHz steps)
MW receiving frequency range	531 to 1602 kHz (9 kHz steps)
LW receiving frequency range	153 to 279 kHz (3 kHz steps)

CD Player Specifications

frequency response	5 Hz to 20 kHz (± 1 dB)
signal to noise ratio	100 dB (1 kHz) IHF-A
dynamic range	96 dB (1 kHz)

General Specifications

output power	4 x 31 W (DIN 45324, +B=14.4V)
power supply voltage	14.4 V DC (10.8 to 15.6 V allowable)
power consumption	Less than 15 A

Weight and Dimensions

main unit weight	1.7 kg
remote control unit weight	30 g (including battery)
main unit dimensions	178 (W) x 50 (H) x 155 (D) mm