EasyManuals Logo

Clarion DXZ938R User Manual

Clarion DXZ938R
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
DXZ938R 31
English
Digital Radio / DAB Operations
Switching programmes
1.
Press the [FNC] button to receive a DAB station.
2. Press the [a] or [d] button to switch
programmes in the DAB station.
Note:
The programme name may be the same depend-
ing on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1.
Press the [FNC] button to receive a DAB station.
2. Perform the following operation depending
on the connected model.
Press the [P/A] button.SERVICE SCN
lights up and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [P/A] button.
Manual memory
The main unit has a manual memory function for
DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [FNC] button to select the DAB
mode.
2. Press the [BND] button to select any one
shown above.
3. Press the [a] or [d] button to select a de-
sired programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1.
Press the [FNC] button to select the DAB mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] [M2] [M3] [M1]...
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
Press and hold the [DIRECT] button for 2 sec-
onds or longer to store the programme currently
being received. (Manual memory)
AF function
The AF function switches to a different fre-
quency on the same network in order to main-
tain optimum reception.
The factory default setting is ON
If the reception of the current broadcast station de-
teriorates, “SEARCH appears in the display and
the radio searches for the same programme on
another frequency.
For details on AF function”, refer to the section
RDS operation of each owner’s manual.
Switching OFF the AF function
Switching ON the AF function
AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode. Traffic programme (TP) auto-
matic tuning is also possible.
This function can only be used when TP” is lit in
the display. When TP is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
For details on TA”, refer to the section “RDS op-
eration of each owner’s manual.
Setting the TA standby mode
Cancelling the TA standby mode
Searching for a TP station
Notes:
If a TP station is not received, the main unit stops
the search operation.
•“TP may be lit in the display when a TP broad-
cast is transmitted from an RDS station. In this
case, press the [TA] button to perform TP seek
tuning. Press the [TA] button again to return to the
previous mode.

Other manuals for Clarion DXZ938R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion DXZ938R and is the answer not in the manual?

Clarion DXZ938R Specifications

Radio Specifications IconRadio Specifications
FM receiving frequency range87.5 to 108 MHz (0.05 MHz steps)
MW receiving frequency range531 to 1602 kHz (9 kHz steps)
LW receiving frequency range153 to 279 kHz (3 kHz steps)
CD Player Specifications IconCD Player Specifications
frequency response5 Hz to 20 kHz (± 1 dB)
signal to noise ratio100 dB (1 kHz) IHF-A
dynamic range96 dB (1 kHz)
General Specifications IconGeneral Specifications
output power4 x 31 W (DIN 45324, +B=14.4V)
power supply voltage14.4 V DC (10.8 to 15.6 V allowable)
power consumptionLess than 15 A
Weight and Dimensions IconWeight and Dimensions
main unit weight1.7 kg
remote control unit weight30 g (including battery)
main unit dimensions178 (W) x 50 (H) x 155 (D) mm

Related product manuals