Clarion DXZ938R User Manual

32 DXZ938R
English
Digital Radio / DAB Operations
INFORMATION item
ENGLISH Contents
TRAVEL Transport flash
WARNING Warning / Service
NEWS News flash
WEATHER Area weather flash
EVENT Event announcement
SPECIAL Special event
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
●Setting the INFO standby mode
If you press and hold the [TA] button for 1 sec-
ond or longer, “INFO” lights in the display and
the main unit is set into the INFO standby mode
until the selected announcement is broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected an-
nouncement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
●Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
●Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
1. Perform the following operation depending
on the connected model.
Press and hold the [TITLE] button for 1 second or
longer.
2. Press the [a] or [d] button to select “INFO
SEL”, then press the [
] button to enter
“INFO SEL” mode.
3. Press the [a] or [d] button to select an in-
formation item. You can select any of 6 items:
TRAVEL ➜ WARNING ➜ NEWS ➜
WEATHER ➜ EVENT ➜ SPECIAL ➜
TRAVEL ➜ ...
4. Perform the following operation depending
on the connected model.
Turn the [ROTARY] knob clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press the [TITLE] button to return to the pre-
vious display.
PTY
This function enables you to listen to the se-
lected programme type, irrespective of the func-
tion mode.
∗ One common PTY can be selected for DAB or RDS.
∗ Of DAB PTY and RDS PTY, the PTY which is re-
ceived earlier takes priority over the other.
∗ PTY broadcasts are not yet available in all coun-
tries.
∗ In the INFO standby mode, INFO stations have pri-
ority over PTY stations.
∗ In the TA standby mode, TP stations have priority
over PTY stations.
∗ For details on “PTY”, refer to the section “RDS op-
eration” of each owner’s manual.
●Setting the PTY standby mode
●Cancelling the PTY standby mode
●Cancelling a PTY interrupt broadcast
●Selecting PTY
●PTY seek
●PTY preset memory
Emergency broadcast
When an emergency broadcast is received, all
the function mode operations are stopped.
“ALARM” appears in the display and the emer-
gency broadcast can be heard.
∗ For details on “Emergency broadcast”, refer to the
section “RDS operation” of each owner’s manual.
●Cancelling an emergency broadcast
Switching the PTY and INFO display
language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY and
INFO shown in the display.
∗ The factory default setting is “ENGLISH”.
∗ For details on “Switching the PTY and INFO dis-
play language”, refer to the section “RDS opera-
tion” of each owner’s manual.

Clarion DXZ938R Specifications

Radio Specifications

FM receiving frequency range	87.5 to 108 MHz (0.05 MHz steps)
MW receiving frequency range	531 to 1602 kHz (9 kHz steps)
LW receiving frequency range	153 to 279 kHz (3 kHz steps)

CD Player Specifications

frequency response	5 Hz to 20 kHz (± 1 dB)
signal to noise ratio	100 dB (1 kHz) IHF-A
dynamic range	96 dB (1 kHz)

General Specifications

output power	4 x 31 W (DIN 45324, +B=14.4V)
power supply voltage	14.4 V DC (10.8 to 15.6 V allowable)
power consumption	Less than 15 A

Weight and Dimensions

main unit weight	1.7 kg
remote control unit weight	30 g (including battery)
main unit dimensions	178 (W) x 50 (H) x 155 (D) mm