Speaker Headphones
When
2-Z0NE
is
set to ON, the current 2-
ZONE type
is
displayed.
The
2-Z0NE
function
is
not available when
2-Z0NE
is
set to
OFF.
Press the [SOUND]
button to return to the original mode.
4.
Touch
"t
I)
~
on
the ON/OFF display to
select the
2-Z0NE
type.
2-Z0NE
type
3.
Touch and hold the ON/OFF center of the
display for 1 second or longer.
• Screen
display
when the 2-Z0NE
function
is
in use
"INT." (internal mode) or "EXT." (external mode)
is
displayed
in
the center of the display to
indicate whether you can hear play
in
the
internal mode or external mode
in
the current 2-
ZONE function operation mode.
1.
Press the [SOUND] button.
2.
Touch 2-Z0NE.
Internal External
Type 1 (internal mode) (external mode)
External Internal
Type 2 (external mode) (internal mode)
5.
Touch the speaker display or the headphone
display to select the
2-Z0NE
function
operation mode.
If you touch the speaker display, you can
operate audio
on
the speakers.
If you touch the headphone display, you can
operate audio
on
the headphones.
6.
Press the [SOUND] button to return to the
original mode.
SUB
MAIN
Different
Pieces
of
Music
Heard
by
Plural
Listeners
(2-Z0NE
function)
The
2-Z0NE
function outputs separate sounds
from the MAIN zone and SUB zone by
simultaneously operating 2 sources
in
the 1
center unit, thereby allowing 2 or more listeners
to enjoy separate music sources.
This unit can control its internal sources (radio,
CD,
MP3, etc.) to play them back, and further, _
can simultaneously play back sources from
external equipment connected via CeNET (for
instance, CD changers etc.).
The sources of the MAIN zone are played back
from the speakers inside your
car,
and those of
the SUB zone are from the headphone systems
(WH1
04/WH204).
The upper figure
is
for when a sound source
is
being played by the unit's internal mode (radio,
CD,
AUX)
on
the speakers.
The lower figure
is
for when a sound source
is
being played by the unit's external mode (CD
changer,
DVD
changer,
TV,
AUX)
on
the
speakers.
• The factory default setting
is
"OFF".
Notes:
• The ISR function is
not
available while the
2-
ZONE
function is in use.
• The
new
volume adjustment made
by
turning the
[ROTARY] knob on this unit is reflected only on
the speakers.
The AUX-SENS setting is reflected on both the
speakers
and
the headphones.
DXZ945MP
31
To Next Page
Loading...
