Clarion DXZ945MP - Display Items; Display Operations

Display Items
Manual indication
Stereo indication
Display Operations
[MUTE)
Dolby PLII indication
Mute indication
ADF (Anti Distortion Filter)
indication
2-Z0NE indication
A touch panel display is used as the display on
this unit.
You can operate this display just by
touching it with your fingertip. There are four
main display operations as follows:
Touch
Touch the display with your fingertip and take it
away within 1 second. This is the most basic
operation when operating the display.
Touch and hold
Touch the display with your fingertip and hold it
on the display for 1 or 2 seconds or longer. Do
not move your finger while you are touching the
display.
Touching and holding the display for 1 second or
longer displays lists, for example, and calls up
other handy functions.
Touching and holding the display for 2 seconds
or longer is used for storing preset memory or
other information.
8 DXZ945MP
Touch -t~~
Touch the display with your fingertip, and move
your finger to the left (
E- ) or right ( ~ ) with your
fingertip still touching the display, and take your
fingertip away within 1 second. This operation is
used for selecting preset memory
(1 to 6) or
tracks.
)
I
,
J\
Touch+~+
Touch the display with your fingertip, and move
your finger to the left (
E- ) or right ( ~ ) with your
fingertip still touching the display, and keep your
fingertip on the display. The current operation
continues for the time your fingertip is held
on
the display. This operation is used, for example,
for manual tuning or fast-forwarding/fast-
backwarding tracks.