Clarion DXZ945MP - Page 35

Operations Common to Each Mode I
Main Item
Sub-item
DISPLAY CLOCK
• Clock setting (ct. page 36)
SCREEN SVR
• Screen saver setting (cf. page 36)
MSGINPUT
• Message information input (cf. page 37)
MESSAGE
• Message display setting at power ON/OFF (ct. page 37)
S/A SENS
• Setting the Spectrum analyzer sensitivity (ct. page 38)
SCROLL
• Adjusting the scroll speed (ct. page 38)
APPERNCE
DIMMER
IN
• Auto-dimmer setting (ct. page 38)
DMR LEVEL
• Setting the dimmer level (cf. page 38)
CONTRAST
• Adjusting the display contrast (cf. page 39)
BLINK LED
• Making the LED blink when DCP is removed (ct. page 39)
BEEP
• Setting beep (cf. page 39)
SOUND
AC-PRO III
• Selecting the VSE mode (STD/PRO) (ct. page 39)
EQ SELECT
• Selecting the equalizer mode (ct. page 39)
SP-SETTING
• Setting the speaker configuration (ct. page 40)
CENTER-SP / SUB-WOOFER
• Setting sub-woofer speaker ON/OFF (ct. page 40)
HPF / SUB-W LPF
• Adjusting the speaker filter frequency (cf. page 41)
AMP CANCEL
• Setting internal amplifier use ON/OFF (cf. page 41)
SPGAIN
• Adjusting the speaker output level (ct. page 41)
PLII DELAY
SRD-SP
• Adjusting the rear speaker delay time (ct. page 42)
PLII CONT PANORAMA / DIMENSION I CTR WIDTH
• Setting the music mode in detail (ct. page 42)
TUNER
TV DIVER
• Setting TV diversity (ct. page 51)
SID DISP
• Display the Sirius ID No. (ct. page 43)
SETTING
AUXSENS
• Setting the portable audio (AUX) input level (cf. page 43)
SYSTEM CHECK
• Performing a system check (ct. page 43)
CODEMATIC
• Setting security (ct. page 44)
• Setting items
DXZ945MP 35