30
English
FB275BT / FB275BTB
Common Operations
Checking the unit version
2-1. Select “VERSION”.
Restoring to factory default setting
This function allows user to restore the unit to the
factory default setting.
System Menu
1. Press and hold
[
]
and
[
]
buttons si
-
multaneously for 1.5 seconds or longer.
2. Press the
[
,
]
button to select an item.
“VERSION” “FACT. RST”
3. Press the
[
]
button to exit the menu.
Selecting microphone input
1. Select “MIC”.
2. Turn the
[
]
knob to select one of
the following:
INTERNAL
:
Built-in microphone will be used.
EXTERNAL
:
An external microphone will be
used.
Note:
The factory default setting is “
INTERNAL”.
2-1. Select “FACT. RST”.
2-2. Push the
[
]
knob. A reset con
-
firmation is prompted.
2-3. Turn the
[
]
knob to select “YES”
or “NO”.
2-4. Push the
[
]
knob to confirm the
selection.
Notes:
All pairing information and preset memories will be
cleared. User will have to manually perform those
setting again.
Once reset, system will automatically turn off and
re-power on.
Clock time will not be reset with this operation.
The clock time reset is done with the following
steps.
1. Turn off the power.
2. Press the
[
RELEASE
]
button and remove the
DCP.
3. Press the reset button with a thin rod.
Automatic connection
This function allows the unit to be connected au-
tomatically with previously connected device dur-
ing power up or entering Telephone mode. The
Bluetooth
®
wireless function in your phone has to
be turned on to establish automatic connection.
1. Select “AUTO CONN
”.
2. Turn the
[
]
knob to select “
ON”
or “OFF”.
ON : Auto connection enabled.
OFF : Auto connection disabled.
Notes:
The factory default setting is “OFF”.
Please enable this feature only if your phone is
supported.
To Next Page
Loading...
