13
English
Radio Operations
Listening to the radio
1. Press [SRC] button and select the radio
mode.
2. Press [BND] button and select the radio
band in the following order:
FM1 FM2 FM3 AM1 AM2
FM1...
Switching display
Press the [DISP] button to change the
display.
Manual tuning
Press [
x
] or [
v
] button to manually
tune a station.
Seek mode setting
2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL
SEEK can tune in to only broadcast
stations with a good reception sensitivity.
∗
The factory default setting is “
DX
”.
1. Select “DX/LO” in system setup items.
2. Turn [ROTARY] knob to select a seek
mode.
Seek tuning
1. Long press [
x
] or [
v
] button to
automatically seek a station.
Recalling a preset station
A total of 30 preset positions (6-FM1,
6-FM2, 6-FM3, 6-AM1, 6-AM2) exists to
store individual radio stations in memory.
Press the corresponding [1]~[6] button
to recall the stored radio frequency
automatically.
Manual store
1. Long press [1]~[6] button to store the
current station into preset memory.
Band scan
Band scan is searching for good
reception stations from current frequency
to higher frequency repeatedly. When a
good reception stations is searched, it will
be listened in 7s. And then it continues
scan.
1. Press [BND] button to select a band.
2. Long press [BND] button.
Auto store
Auto store is a function for storing up to
6stations that are automatically tuned
insequentially. If 6 receivable stations
cannot be received, a previously stored
station remains unover written at the
memory position.
1. Select
“
AUTO STORE
”
in system setup
items (page 11).
2. Long press [ROTARY] knob.
The stations with good reception are
stored automatically to the preset
channels.
∗
If auto store is performed in the FM bands,
the stations are stored in FM3.
If auto store is performed in the AM bands,
the stations are stored in AM2.
To Next Page
Loading...
Need help?
General
