23
English
6. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display Cause Measure
Disc Play
CD MECHA
ERROR
This is a failure of CD deck’s
mechanism.
Eject the disc then reload it.
DISC ERROR A CD cannot be played due to
scratches, etc.
Replace with a non-scratched,
non-warped-disc.
A CD is loaded upside-down inside
the CD deck and does not play.
Eject the disc then reload it
properly.
NO FILE No MP3/WMA file is recorded in
the device.
Record MP3/WMA files in the
device.
USB
USB ERROR Protocol or File system is not
correct.
Replace with a USB device in
correct protocol or file system.
NO DEVICE No connection or the connection is
loose.
Reconnect the device.
NO FILE No MP3/WMA file is stored in the
device.
Store MP3/WMA files in the
device.
HUB NOT
SUPPORT
The HUB devices are not
supported.
Do not use the HUB devices.
DEVICE NOT
SUPPORT
The connected USB is not
supported.
Connect the other supported
device.
If an error display other than the ones described above appears, restart this unit. If the
problem persists, turn off the power and consult your store of purchase.
To Next Page
Loading...
Need help?
General
