This feature allows you to receive a warning when approaching a Road
Safety Camera or other alert points like school zones or ra
crossings. You must ensure on your own liability that using this feature
is legal in the country where you intend to use it.
You can set the alert for the different alert point categories individually.
The following alert types are available:
• Audio warning: beeps can be played (natural voice) or the type of
the alert can be announced (TTS) while you are approaching one
of these points, and an extra alert can warn you if you exceed the
given speed limit while approaching.
• Visual warning: the type of the alert point, its distance and the
related speed limit appear on the Map screen while you are
approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is
available. For these points, the audio alert can be dif
below or above the given speed limit.
• Only when speeding: The audio alert is only played when you
exceed the given speed limit.
• When approaching: The audio alert is always played when
approaching one of these alert points. In order to draw your
attention, the alert is different when you exceed the speed limit.
Maps may contain driver alert information. Tap this button to turn on or
off these warnings and to set the distance from the hazard to receive
the warning at. These can be set individually for the different warning
types.
You can control the volume of the following sound types:
This is the main volume control.
Use the hardware knob to adjust the
main volume.
These c
ontrols affect the volume of the guidance sounds (verbal
instructions).
Turn off the attention tone preceding verbal instructions or adjust its
volume.
These controls affect the volume of the non verbal alert sounds (beeps).
88 NX404E English
To Next Page
Loading...
Need help?
General
