To Next PageTo Next PageHow to fix Clarion NX409 Car Video System when power does not turn on?
If your Clarion Car Video System isn't powering on, and there's no sound, the fuse may be blown. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Also, incorrect wiring may be the cause, in which case, you should consult your store of purchase.
What to do if the Clarion Car Video System sound skips or is noisy?
If the sound skips or is noisy on your Clarion Car Video System, it could be due to a dirty compact disc. Clean the disc with a soft cloth. Alternatively, the compact disc may be heavily scratched or warped. In this case, replace it with a compact disc that has no scratches.
What to do if my Clarion NX409 Car Video System USB device is not recognized?
If your Clarion Car Video System isn't recognizing the USB device, disconnect the USB device and reconnect. If the device is still not recognized, try replacing it with a different USB device. Also, ensure that connectors are not loose.
Why is my Clarion NX409 image not displayed?
If the image is not displayed on your Clarion Car Video System, ensure that the parking brake is engaged.
What to do if nothing happens when buttons are pressed on my Clarion Car Video System?
If nothing happens when you press the buttons on your Clarion Car Video System, and the display isn't accurate, the microprocessor may have malfunctioned due to noise. Turn off the power and open the operation panel. Then, press the reset button with a thin rod. Note that when the Reset button is pressed, turn off the ACC power and frequencies of radio stations, titles, etc. stored in memory are cleared.
What to do if my Clarion NX409 disc cannot be loaded?
If your Clarion Car Video System disc cannot be loaded, it might be because another disc is already loaded. Eject the disc before loading the new one. Alternatively, there might be a foreign matter already in place; eject any foreign matter forcibly.
Why is the sound bad directly after turning on my Clarion Car Video System?
If the sound is bad immediately after turning on your Clarion Car Video System, water droplets may have formed on the internal lens if the car was parked in a humid place. Let it dry for about 1 hour with the power on.
How to fix Clarion NX409 Car Video System remote control that does not work?
If the remote control for your Clarion Car Video System isn't working, it could be due to a couple of reasons: * Direct sunlight falling on the light-receptive part of the remote. * The batteries are dead or missing. Check the batteries of the remote control unit.
What to do if my Clarion Car Video System USB device cannot be inserted?
If your Clarion Car Video System USB device cannot be inserted, it might be because the USB device has been inserted in the wrong direction. Try reversing the connection direction. If that doesn't work, the USB connector may be broken; replace it with a new USB device.
Why no sound heard with the display “NO FILE” shown on my Clarion NX409?
If you hear no sound and the display shows “NO FILE” on your Clarion Car Video System, it's likely that no MP3/WMA/AAC file is stored on the USB device. Ensure these files are properly stored on the USB device.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| Navigation | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| DVD Player | Yes |
| Rear View Camera Input | Yes |
| AUX Input | Yes |
| AM/FM Radio | Yes |
| Steering Wheel Control Compatibility | Yes |
| Audio Formats Supported | MP3, WMA |
| Video Formats Supported | MPEG-1, MPEG-2, DivX |
| Display Size | 6.2 inch |
Details on expanding audio and visual features, including satellite radio and rear monitor compatibility.
Diagram and identification of buttons and controls on the main unit's operational panel.
Detailed explanation of the function for each button on the main unit.
Layout and identification of buttons on the remote control unit.
Explanation of each button's function on the remote control for various modes.
Cautions regarding the operation panel's temperature range, cleaning, and physical handling.
Precautions for using the navigation system, including battery discharge and key interaction.
Notes on USB memory stick usage and guidelines for cleaning the unit and screen.
Guidelines for handling, cleaning, and storing discs to ensure proper playback.
Details on multi-sound, multi-angle, subpicture, and multi-story functions for DVD playback.
Information on disc compatibility, including CD Extra, MP3/WMA, and region number details.
Instructions for turning the unit on/off, opening/closing the panel, and adjusting its angle.
How to select modes, turn the monitor on/off, and adjust volume and audio settings.
Guide to adjusting the clock, radio region, and displaying the navigation map.
Procedures for listening to the radio, seek tuning, manual tuning, and auto store.
Using preset scan, LOC/DX settings, and changing DVD system settings.
Instructions for parental controls, disc loading, ejecting, and showing the player mode screen.
How to use the DVD player menu, stop, play/pause, skip tracks, and fast forward/backward.
Using title menus, switching subtitles, angles, and displaying playback status.
Details on playing MP3/WMA files, TAG titles, and precautions for disc creation.
How to play MP3 folders and use the playback picture menu functions.
Steps to select Sirius mode, confirm radio ID, and perform channel selection.
Managing presets, parental controls, password settings, and receiving stations by category.
Overview of navigation software, vehicle position tracking, and map database information.
Using the Main Menu, selecting destinations via address or point of interest.
Details on searching for points of interest by category, city, or name.
Routing via coordinates, favorites, and editing saved destinations.
Configuring routing criteria, display options, user preferences, and location resets.
Using the trip computer for readings and resets, and setting up office address guidance.
Connecting and operating iPod/iPhone, including audio-only and video playback notes.
Using shuffle, play/pause, EQ, skipping tracks, fast forward, and video playback controls.
Guidelines for using USB memories, file formats (MP3/WMA/AAC), and tag title limitations.
Notes on folder hierarchy, file limits, and playing files from USB memory.
How to switch to AUX IN or AV IN modes for external video sources.
Instructions for switching to Camera mode and displaying external video from a camera.
Setting up clock, beep, camera image, radio field, TV shape, Aux IN format, and brightness.
Configuring audio settings (bass, treble, filter) and navigation system preferences.
Setting up password, parental controls, software updates, and phone/monitor settings.
Solutions for power issues, button response, display accuracy, and remote control problems.
Resolving issues with disc loading, sound quality, image display, and parental violation errors.
Troubleshooting USB device recognition and common DVD player error messages.
Technical specifications for FM/AM tuners and the DVD player system.
Specifications for navigation memory, display resolution, and general unit details.
Details on power output capabilities and signal-to-noise ratio for audio performance.
Preparation steps, package contents, and general cautions before starting installation.
Cautions on installing the unit, including panel operation and angle limits.
Instructions for installing the main unit in NISSAN and TOYOTA vehicles.
Safety precautions for wiring, fuse replacement, and detailed wire connection diagrams.
Guide to connecting the parking brake cord and external accessories like amplifiers and iPod/iPhone.
