Radio
Op_e_ra_t_io_n_s
_
Listening to the Radio
1. Touch the
Tuner
button on the Main menu
display.
The
tuner
mode
screen is displayed.
2. Press the
[BAND] button
or
touch the [Band]
key on remote control
to
select the radio
band. Each time the button is pressed, the
radio reception
band
changes in the following
order: FM1
FM2 FM3
AM
FM1
...
Seek
Tuning
1. Press the [BAND] button to select the radio
band (FM
or
AM).
2. Touch the [
.....
]
or
[~]
key
to
automatically
seek a station.
•
When
touching the
[~]
key, the station is
sought
in the direction of
higher
frequencies.
·When
touching the [
.....
]
key,
the station is
sought in the direction
of
lower frequencies.
Manual Tuning
1. Press the [BAND] button
to
select the radio
band (FM
or
AM).
2. Touch the [
...
]
or
[
~
] key to automatically
seek
a station.
•
When
touching the [
~
]
key,
the station is
sought in the direction
of
higher
frequencies.
•
When
touching
the
[
...
]
key,
the station is
sought in the direction of lower frequencies.
Recalling a preset station
There
are
2 ways
to
recall the preset station.
• Using the remote control:
1. Press the
[BAND] button to select the
desire band (FM
or
AM) on the remote
control.
2. Press the preset
number
(1
to
6) on
numeric pad.
NX409/NZ409
1.
Tuner
display
12.
Tune
Up
2.
Sianal intensitv
13.
Seek
Un
3.
Time display
14.
Band button
4.
Return
to
previous
15.
AS
button
screen
16.
PS
button
5.
Band display
17.
LOC/DX Button
6.
Loc/DX display
18.
Slide Bar (Use
it
7.
Stereo/Mono
to
hide some
signal mode
function buttons)
8.
Preset list
19.
Previous page
9.
Seek down
button
10.
Tune
down
20.
Next page button
11.
Scan button
21.
EO
mode
button
• Using the
tuner
unit:
1. Press the
[BAND] button
to
select the
desire band (FM
or
AM) on the tuner.
2. Press the preset station
(1
to
5) on
tuner
display.
3. Press
[X]
or
[I]
to
select next station up
or
down the preset list.
4. Press [AS] button
to
auto
search the preset
stations.
Auto Store
The
Auto Store is a function for storing up to 12
stations that are automatically tuned in
sequentially. If 12 receivable stations
cannot
be
received, a previously stored station remains
unoverwritten
at
the
memory
position.
1. Touch the
[Band] key
to
select the desired
band. (FM
or
AM)
2. Touch the
[AS] key
momentarily
to
start
the Auto Store function.
A beep
sounds
and the stations with
good
reception are stored automatically to the
preset channels.
21
To Next Page
Loading...
Need help?
General
