6.
Enter the required information
on
the screens
displayed
in
the order shown below.
In
order to proceed to the next sreen,
press the "Check" button.
7.
Press the highlighted "Start Route" button.
8.
Route map will be displayed. The navigation to
your destination will start.
9.
To
set up navigation menu, see "Navigation
set
up
"
in
"Setup Operations" chapter.
Reset
to
Factory Defaults
1.
Press Setup to enter setting menu mode.
2.
Press the Misc button.
3.
Press Load Factory button.
Select
[YES] to restore your unit to factory
default settings. This function will erase all
memory from the unit and you must reset all
personalized items such as tuner presets.
NOTE:
You
will be asked once to confirm that
you
would like to re.set the unit. The unit will
power
down
and
restart with factory defaults.
20
1.
Zoom Out
2.
Map Scale
3.
GPS Status
4.
Com ass Position
5.
Current Time
6.
Back to Menu
7.
Locallnformation
8.
Mute
9.
Chan e View
10. Zoom
In
NX409/NZ409
To Next Page
Loading...
