Clarion NX503E - Selecting an Intersection as the Destination

38 NX503E English
7. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
3.1.2.3 Selecting an intersection as the destination
To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap
to return to the Navigation Menu.
2. In the Navigation Menu, tap the following buttons:
, .
3. If necessary, modify the country and city/town as described earlier (page 34).
4. Enter the street name:
a. Tap
.
b. Start entering the street name on the keyboard.
c. Find the street you need:
 The most likely street name is always shown in the input field. To accept
it, tap
.
 If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
). Select
the street from the list.
5. Enter the intersecting street name:
1. Tap
.
 If only a few intersecting streets exist, their list appears immediately.