EasyManuals Logo

Clarion Ungo Pro Security RK1 User Manual

Clarion Ungo Pro Security RK1
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
8
locking
Pressing for one second locks the doors (if the door locks are con-
nected) and activates the starter kill. The horn will honk (if connected) and
the parking lights will flash once to confirm arming of the system. While
the system is locked, the status LED will flash once per second. The Starter
Kill (if installed) will also prevent the vehicle’s starter from cranking.
The system can also be programmed to arm the optional Starter Kill
automatically (called Passive Mode). If the system has been pro-
grammed for Passive Mode, the Starter Kill will automatically activate
30 seconds after the ignition has been turned off. After the ignition has
been turned off, the status LED will flash rapidly to indicate that the sys-
tem is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible to pro-
gram the system for Passive Locking. With Passive Locking, the vehicle
doors lock automatically at the same time that the Starter Kill is acti-
vated. If Passive Locking is programmed on, care must be taken to pre-
vent the keys from being locked in the vehicle.
NNOOTTEE::
For Passive Mode to be effective, the Starter Kill relay must be
installed.

Other manuals for Clarion Ungo Pro Security RK1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion Ungo Pro Security RK1 and is the answer not in the manual?

Clarion Ungo Pro Security RK1 Specifications

General IconGeneral
BrandClarion
ModelUngo Pro Security RK1
CategoryCar Alarm
LanguageEnglish

Related product manuals