11
remote engine start
This feature allows you to remotely start and run your vehicle for a pro-
grammable period of time. This makes it possible to warm up the
engine, as well as adjust the interior temperature of the vehicle with
the climate control system. If interior heating or cooling is desired, the
climate controls must be preset, and the fan blower must be set to the
desired level prior to remote engine starting the vehicle.
IIMMPPOORRTTAANNTT!!
(1) This product is not for use in manual transmissions.
(2) Never remotely start the vehicle with the key in the
ignition.
To remote engine start the vehicle:
1. Press the button twice within 3 seconds on the remote.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. Release the button as soon as the parking lights flash. (In
gasoline vehicles, the engine will start 4 seconds after the parking
lights flash. In diesel vehicles, the engine will start when the
WAIT-TO-START indicator on the vehicle's dash goes out.)
4. Once the vehicle has started, it will run for the pre-programmed
period of time (either 12, 24, or 60 minutes - see Programming
Options section of this guide) or until a shutdown input is triggered.
To Next Page
Loading...
Need help?
General
