Clarity C4220+ - MENU - VISUAL RING (Handset); MENU - AUTO BOOST; MENU - PHONE SETUP

24
C4220+
25
E
N
G
L
I
S
H
C4220+
Phonebook
CallerList
RingSetup
In standby mode, press MENU.
Press DOWN arrow three times, to advance the row
that reads “Visual Ring” to the top of the screen.
Press MENU to enter the handset visual ringer On /
Off setup.
Use UP or DOWN to make your selection,
indicated by the cursor on the left of the screen. Press
MENU to save your selection. Screen will display
“OK” and you will hear ve beeps.
NOTE: This option refers to the handset visual ringer
only.
In standby mode, press MENU.
Press DOWN arrow four times, to advance the row
that reads “Auto Boost” to the top of the screen.
Press MENU to enter the Auto Boost On / Off setup.
Use UP or DOWN to make your selection,
indicated by the cursor on the left of the screen.
Press MENU to save your selection. Screen will
display “OK” and you will hear ve beeps.
Phonebook
CallerList
RingSetup
C4220+
PhoneSetup
AutoBoost
Date&Time
Off
AutoBoost
On
PhoneSetup
AutoBoost
VisualRing
VisualRing
On
Off
In standby mode, press MENU.
Press DOWN arrow ve times, to advance the row
that reads “Phone Setup” to the top of the screen.
Press MENU to enter the Phone Setup submenu.
The Phone Setup submenu allows you to adjust the
following features:
• Register
• Auto Talk (On / Off, default: Off)
• Voice Assist (Voice Asst: On / Off; default: On)
• Any Key Answer (On / Off; default: Off)
• Language (English/French/Spanish, default: English)
• Dial Mode (Tone / Pulse, default: Tone)
• Contrast (1-5, default: 3)
From here, choose one of the paths described below:
• Register
Press MENU to access this function. See details on
page 28.
• Auto Talk
Press DOWN once to advance the row reading
“Auto Talk” to the top of the screen.
Press MENU to enter this option.
Use UP or DOWN to make your selection,
indicated by the cursor on the left of the screen.
Press MENU to save your selection. Screen will
display “OK” and you will hear ve beeps.
• Voice Assist
Press DOWN twice to advance the row reading
“Voice Asst” to the top of the screen.
This option activates the audio numbers - both for the
phone numbers dialed, as well as the incoming phone
numbers (with optional CID service from your local
phone service provider.)
Phonebook
CallerList
RingSetup
PhoneSetup
-----------
Date&Time
Register
VoiceAsst
AutoTalk
AutoTalk
AnyKeyAns
VoiceAsst
AutoTalk
On
Off
VoiceAsst
Language
AnyKeyAns
MENU - PHONE SETUPMENU - VISUAL RING (Handset)
MENU - AUTO BOOST