Clark WP30 - Maintenance and Lubrication Schedule

Section 6. Planned Maintenance and Lubrication
6.3
Maintenance and Lubrication Schedule
Recommended Planned Maintenance Intervals:
A = 8-10 hours daily
B = 50-250 hours or every month
C = 450 - 500 hours or every 3 months
D = 900 - 1000 hours or every 6 months
E = 2000 hours or every year
Check truck visually and inspect components.
Test drive truck/check functional performance.
Air clean truck. (including all motors)
Check torque on critical fasteners.
Lubricate truck.
Clean / Check battery terminals, electrolyte level.
Check battery cables / truck receptacle.
Perform battery load test.
Check drive motor brushes.
Check lift motor brushes.
Test for shorts and grounds.
Clean drive motor air vent.
Drain and replace drive unit fluid.
Check hydraulic fliud level.
Drain and replace hydraulic fluid
Check brake shoe lining.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Maintenance and Lubrication Schedule