Clark WP30 - Safety Standards

Section 6. Planned Maintenance and Lubrication
6.7
Safety Standards
NOTICE
You should also be familiar with additional operating
and maintenance safety instructions contained in the
following publications:
ANSI / ITSDF B56.1: Safety Standard for Low Lift and High Lift Trucks
(SafetyCodeForPoweredIndustrialTrucks).Publishedby:Industrial
TruckStandardsDevelopmentFoundation.1750KStreetNW,Suite
460, Washington DC 20009, www.itsdf.org.
NFPA 505: Fire Safety Standard for Powered Industrial Trucks: Type
Designations, Areas of Use, Maintenance and Operation.Available
from:NationalFireProtectionAssoc.,Inc.,BatterymarchPark,Quincy,
MA02269.
General Industry Standards, OSHA 2206: OSHA Safety and Health
Standards (29 CFR 1910), Subpart N - Materials Handling and Storage,
Section 1910.178 Powered Industrial Trucks. For sale by: Superin-
tendentofDocuments,U.S.GovernmentPrintingO󰀩ce,Washington,
D.C.20402orcontactyourCLARKdealer.
Safety Maintenance Practices