39
SPECIFICATIONS
Please note that the details and specifications contained herein, are correct at the
time of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice.
ALWAYS CONSULT THE MACHINE’S DATA PLATE
* Duty Cycle: Determines the machine ‘down time’.
eg MIG100-EN, operating at 55 Amps - Duty Cycle - 60%. This means that in ANY 10 minute
period, the machine may operate for 6 minutes and must have a down time of 4 minutes.
90EN 100EN 105EN 151TE
Power Supply
230V 50Hz 1Ph 230V 50Hz 1Ph 230V 50Hz 1Ph 230V 50Hz 1Ph
Fuse Rating 13Amps 13Amps 13Amps 13Amps
Current Range 30-90A 30-100A 30-100A 30-150A
Max. Metal Thickness 3-4mm 4-5mm 4-5mm 5-6mm
Welding Wire Sizes 0.6-0.9mm 0.6-0.9mm 0.6-0.9mm 0.6-0.9mm
Duty Cycle* 8% 80A - - -
15% - 100A 90A 130A
60% 30A 55A 48A 62A
100% 24A 40A 37A 48A
Dimensions 430X250X370mm 430X250X370mm 430X250X370mm 700X320X580mm
Weight 23kg 28kg 22kg 25kg
Part No. 6010107 6010103 6014010 6014100
To Previous Page
Loading...
