10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
REMOTE CONTROL
The remote control incorporates the following controls:
The POWER button turns the unit on or off.
The TIMER button sets the timer.
The SWING button makes the vertical louvre swing
automatically from side to side.
Switches between degrees Celsius to degrees Fahrenheit.
Selects the COOLING mode.
Selects the DRYING mode.
Selects FAN mode.
Press either the UP or DOWN button to set the temperature
or adjust the time in TIMER mode.
Selects the high fan speed.
Selects the medium fan speed.
Selects the low fan speed.
Sets the energy saving mode only in COOL. The set
temperature is 27
o
C in COOL mode. The fan speed will be
low. This is a pre-set mode which cannot be modified.
To Next Page
Loading...
Need help?
General
