6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CONTENTS
Ensure the air conditioner and its components suffered no damage during
transit and that all components are present. Should any loss or damage be
apparent, please contact your CLARKE dealer immediately.
The following components are supplied with the unit;
1. Flexible exhaust duct.
2. Window exhaust adaptor (flat
mouth).
3. Standard exhaust adaptor
(square mouth).
4. Adjustable window slider plate (2
parts).
5. Remote control unit.
INSTALLATION
IMPORTANT: Do not locate your air conditioner where it will be exposed to
sources of heat as it is designed to operate at temperatures of no more than
40
o
C.
1. Always transport the appliance upright or resting on one side. Remember
to drain the tank before moving the appliance.
• It is recommended to wait at up to 24 hours after transporting the
appliance before using it, to allow the refrigerant gasses to settle.
2. Position the unit on a level, dry
surface with at least 50 cm of free
air space around the unit.
3. Fit the flexible duct to the adaptor
by twisting it in a clockwise
direction. Similarly, fit the window
exhaust adaptor to the other end
of the duct.
4. Slide the square exhaust adaptor
onto the exhaust terminal of the
air conditioning unit.
5. Move the air conditioner into position, and extend the flexible exhaust duct
to suit your window layout.
To Next Page
Loading...
Need help?
General
