Service Manual-CA60 40 Recovery System 85
Troubleshooting
The vacuum system motor does not turn
on
The vacuum system motor is faulty
The recovery water vacuuming is
insufficient or there is no vacuuming
The recovery tank is full
The vacuum hose is disconnected from
the squeegee
The vacuum grid is dirty or the float is
blocked
Clean the grid/reactivate the float
The tank cover is not correctly positioned
The tank cover gasket is not in good
condition
The vacuum gaskets are damaged or
do not match perfectly
The squeegee vacuum hose is broken
The vacuum tank is broken
To Next Page
Loading...
Need help?
General
