PARTS and SERVICE
Please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com
SPECIFICATIONS
Motor .....................................................................................230VAC 50Hz 1Ph
Power Rating ..............................................................350W
Capacitor ...................................................................6 uF 450V
Current Rating ............................................................3.5 Amps
Blade Speed ..........................................................................14.7 M/s
Blade Length ..........................................................................1425mm (6tpi)
Max. Cutting Thickness .........................................................80 mm
Max. Cutting Width ...............................................................190 mm
Table Size ................................................................................300 x 300 mm
Table Tilt ..................................................................................45
O
right
Dimensions .............................................................................425x370x675 mm
Weight net/gross..................................................................17.5/20 kg
Part Number ........................................................................... 6460130
These specifications are correct at the time of going to print. Clarke International reserves the right to change specifications at any
time in the inerests of safety or design change.
2
To Next Page
Loading...
Need help?
General
