Clean PH200 User Manual

After entering P-07, you can select NO or YES to not clear or clear the data by pressing .
If select YES, the meter will clear all the saved data.
Please refer to above description steps to set up P-06.
You can go to next parameter setting by pressing , or pressing key to quit and go
back to measurement mode.
After entering P-06, you can select ON or OFF the Auto Power Off by pressing . If the
Auto Power Off is ON, the meter will power off if no operation in 10mins.
Please refer to above description steps to set up P-06.
You can go to next parameter setting by pressing , or pressing key to quit and go
back to measurement mode.
P-07 Clearing Memory Function
P-06 Auto Power Off Setting
13

Clean PH200 Specifications

General

Brand	Clean
Model	PH200
Category	Measuring Instruments
Language	English