22
Battery
1. Remove the screws on battery cover with a screw driver.
2. Remove the battery cover.
3. Unplug the wire connector that links the battery and robot.
4. Install battery inside the battery house, make sure the side printed words upside
5. Connect the cable of battery and robot
6. Tidy the cables and connection
7. Put the battery inside the battery house
8. Lock the battery cover screw
Note:
Only use the original battery of the product, otherwise it may cause product damage.
Usage of Magnetic Strip
Function of Magnetic strip
There is magnetic sensor inside the robot, when it detects that there is a magnet, the robot will automatically
change direction or turn back. The magnetic strip will let you decide where your robot can go and where it
should
“keep out”. During cleaning, simply place the magnetic strip in doorways, around pet bowls, cords, or
anywhere you don’t want the robot to go. For example, stick the magnetic strip in front of the washing room
.
To Next Page
Loading...
