CleanSpace Respirators USER INSTRUCTIONS
34
Combined Filters – For Gases & Particulates
Combined Filter ABE1P3 (Australia)
Combined Filter ABEK1P3 (Australia)
Combined Filter TM3 A1 P SL R (Europe)
Combined Filter TM3 ABE1 P SL R (Europe)
Combined Filter TM3 ABEK1 P SL R (Europe)
Combined Filter TM3 A2 P SL R (Europe)
Accessories & Spares: Harness, Neck Supports
& Battery Charger
ACCESSORIES FOR WHICH IECEX / ATEX / ETL CERTIFICATION IS NOT REQUIRED
The accessories listed below are used outside the hazardous area and can be used with CleanSpace EX without impacting its
explosive atmospheres certifications.
Accessories
Flow Test Cap (for checking filter condition and battery charge)
Adaptor for Fit Testing (for half masks)
Seal Check Cap (for positive pressure seal tests on Half masks)
COMPONENTS THAT DO NOT HAVE IECEX / ATEX / ETL APPROVAL
These components can be added to the system without affecting the respiratory protection approvals listed above. They have
not been certified for use in explosive atmospheres.
Power Units
CleanSpace2 Power Unit (Full Kit, without mask)
CleanSpace Ultra Power Unit (Full Kit, without mask)
Mask: Full Face Mask Medium / Large
Mask: Full Face Mask Small
Combined Filters – For Gases & Particulates
Filter Adaptor - all large-case filters (PAF-0037, -0050, -0051, -0052, -0077, -0076, -0091)