18. Product Warranty
This product has been manufactured using quality parts and processes.
CleanSpace Technology Pty Ltd warrants that the product is free from defective workmanship and parts for a period of two (2)
years from the date of original purchase provided the product has been used, cleaned and maintained in accordance with these
instructions and CleanSpace Technology’s recommendations. This warranty does not include consumable parts, such as filters
and face masks, which must be replaced regularly by the user. Consumable parts are warranted up to the point of use, provided
they have been stored correctly and are within their expiry date. This warranty does not cover:
•
Where the product has been used for industrial purposes outside the recommendations of CleanSpace Technology Pty Ltd;
•
Where damage has been caused by misuse, neglect, accident, or excessive wear and tear.
Any claim under this warranty must be made within two (2) year of the date of purchase of the product. All warranty claims
must be made by returning the defective product to your supplier together with the proof of purchase. The purchaser is
responsible for all freight. In the event that any part of the product is found by CleanSpace Technology to be defective,
CleanSpace Technology will either repair or at its discretion replace the faulty part.
This warranty is provided in addition to other rights and remedies you have under law. You are entitled to replacement or refund
for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
This warranty is given by:
CleanSpace Technology Pty Ltd ABN 24 146 453 554
Unit 5, 39 Herbert St, St Leonards NSW 2065 Australia;
T. +612 8236 4000 E. sales@CleanSpaceTechnology.com
Disclaimer:
Whilst CleanSpace Technology has made every effort to ensure that the details and information given in both our printed and
online publications are accurate at the time of issue, full technical specifications are not necessarily included. Furthermore,
CleanSpace Technology has a policy of continuous improvement and the right is reserved to alter details and information as the
need arises. Accordingly, the Customer should check any details and information they wish to rely on with CleanSpace
Technology at the time of purchase. CleanSpace Technology cannot accept liability in respect of any errors or omissions herein
contained or for any loss or damage malfunction or consequential loss arising from reliance upon our publication. The Customer
will be responsible for any risk to health or safety from goods in the Customer’s possession and/or control. The Customer’s
attention is drawn to the fact that statutory regulations and recognised codes of practice exist covering the use and handling of
some goods (including safety products). The Customer must ensure that persons who use the goods receive adequate training
and safety literature. No page or part of this manual may be reproduced in any form without written permission of the copyright
owner shown above. CleanSpace Technology reserves the right to correct typographical errors. All information is correct at the
time of going to print.
S005-7178 Rev 11 RELEASED ON ECN 1479 18
th
May 2021
To Previous Page
Loading...
