Need help?Do you have a question about the CleanSpace HALO and is the answer not in the manual?
General| Brand | CleanSpace |
|---|---|
| Model | HALO |
| Category | Respiratory Product |
| Language | English |
Explains the CleanSpace HALO's operation, breath responsiveness, and alarm indicators.
Highlights essential warnings regarding misuse, oxygen deficiency, and fit factor requirements.
Specifies the required quantitative fit factors for half and full face masks.
Covers recalibration needs due to temperature changes and battery charging indicators.
Details restrictions on use, environmental limits, and immediate evacuation triggers.
Lists all parts of the CleanSpace HALO system with corresponding part numbers.
Details the specific parts and configuration for the HALO BIO system.
Explains the power button functions and the respirator's operating modes (On, Standby, Off).
Guidance on selecting, fitting the correct mask, and qualitative/quantitative fit testing.
Describes the flow test button and how to interpret battery status indicators.
Information on the filter blocked alarm, its triggers, and actions to take.
Essential visual checks of the power unit, mask, harness, and filter before use.
Procedures for recalibrating the respirator and testing its airflow performance.
Details on attaching and adjusting the harness and fitting the neck support.
Instructions for placing the power unit in standby and adjusting bellows.
Ensuring harness support and adjusting the mask for a comfortable seal.
Performing the critical mask seal check and installing the optional Steri-Plus filter.
Performing a seal check specifically for the BioHood configuration.
Pre-use checks, calibration, and airflow testing for full face masks.
Step-by-step instructions for donning the full face mask and adjusting harness straps.
Checking for correct mask seal at the hairline and performing a negative pressure seal check.
Instructions for fitting the neck support and connecting the power unit air clips.
Guidelines for safe entry into and exit from contaminated zones.
Safety measures for working in environments where alarms may not be heard.
Instructions on how to safely remove the respirator after use.
Criteria for changing filters and understanding the blocked filter alarm.
Detailed steps for replacing filters and testing the blocked filter alarm.
Instructions for changing Bio Exhalation Filters and assembling Steri-Plus filters.
How to check battery levels, important warnings, and the charging process.
Details on low battery alarms, battery technology, and storage conditions.
Methods for cleaning the half mask, harness, and neck support.
Procedures for cleaning the full face mask and its inner components.
Instructions for cleaning the power unit, valve covers, and related accessories.
Emphasizes the importance of recalibrating the respirator after temperature changes or storage.
Step-by-step guide for removing and fitting standard or BIO exhalation valve covers.
Detailed procedures for conducting quantitative fit tests on half and full face masks.
Specifies fit factor requirements and lists product certifications and standards.
Details on airflow, operating ranges, battery, alarms, and other technical data.
Lists all available product codes, descriptions, and accessories.
Outlines the product warranty period, coverage, and claim process.
Contains important disclaimers regarding accuracy and user responsibility.
To Next Page
