Clear-Com Eclipse HX-Median User Manual

User Guide| Eclipse HX-Median
Page 104
 Long Haul Receive Signal Level.
 E1 120 Ohm Transmit Pulse Amplitude.
 Balanced.
 120 Ohm Line Impedance.
 No Signaling.
 G.722 or G.711 64 kbit/s Audio Encoding.
 Tx Clock locally generated.
 Rx Clock Line Recovered.
Figure 8-6: Matrix to Matrix direct E1 Trunking shows E1 trunking using a
direct connection between the matrices using a CAT5 crossover cable. The E-
QUE interface should be set to E1 Direct in EHX hardware setup.

Clear-Com Eclipse HX-Median Specifications

General

Brand	Clear-Com
Model	Eclipse HX-Median
Category	Intercom System
Language	English