Clear-Com RS-600 Series - 8 Service Information; 9 Warranty Information

Clear-Com Intercom Systems
6
Problem: Mic level too low or high
Cause: Mic distance from mouth too far or too close; mic gain set incorrectly; sidetone set incorrectly; none or more
than one termination.
Solution: Reposition mic and/or change headset mic gain.
Problem: Headset level too low or high
Cause: Unterminated channel; improper impedance; shorted line
Solution: Adjust sidetone and listen level controls; check wiring; use compatible headset
Problem: Can’t change configuration on beltpack.
Cause: Access to Functions is disabled.
Solution: Restore access with PC or factory default restore.
8. Service Information
Contact the factory.
9. Warranty Information
(2 years)