Clear-Com RS-602 - Headset and Auxiliary Connectors

1 4
RS-602/622 BELTPACK
Figure 4: Sidetone controls for channels A and B
Sidetone Control, Channel A
Sidetone Control, Channel B
To adjust the beltpack’s “sidetone,” or the level of one’s
own voice in the headset, insert a small flat-headed
screwdriver into one of the two holes labeled “sidetone”
on the back of the beltpack, as shown in Figure 4.
The upper control adjusts the sidetone for channel A.
The lower control adjusts the sidetone for channel B.


4JEFUPOFBEKVTU
DIBOOFM"
4JEFUPOFBEKVTU
DIBOOFM#
PP4*%&50/&P
11
12