32
RS-602/622 BELTPACK
Electret Microphone, Function 5
This function allows a beltpack to operate with an electret-
microphone equipped headset. It only affects a headset connected to
the main headset jack. Toggling the function to off reverts the
beltpack to dynamic microphone operation.
To select “electret microphone” for a channel:
1. Press and hold the setup button until the setup information
window displays a “P” and then release the button.
2. Repeatedly press the Call A button until “5” appears in the display.
3. Press the Talk A button to toggle “electret microphone” either on
or off.
• If the talk lights are on, the “electret microphone” option is on;
if the talk light is off, the “electret microphone” option is off.
• The “electret microphone” option affects both channels.
4. When you have made your selections, press the setup button to save
them and to exit setup, or press the Call A button to select other
functions to program.
If you do not press a button within five seconds, the beltpack exits the
setup program without making any changes.
To Next Page
Loading...
