32
Performing a Blood Glucose Test
1. Insert the test strip to turn on the meter
Wait for the meter to display the test strip
and blood drop
symbols.
2. Obtaining a blood sample
Use the pre-set lancing device to puncture
the desired site. After penetration, discard
the rst drop of blood with a clean cotton
swab. Gently squeeze the punctured area
to obtain another drop of blood. Be careful
NOT to smear the blood sample.
The volume of blood sample must be at
least 0.7 microliter (μL) of volume. (
actual
size).
3. Apply the Sample
Hold the blood drop to touch the absorbent
hole of the test strip. Blood will be drawn
in and after the conrmation window is
completely lled, the meter begins counting
down.
Correct
Incorrect
To Next Page
Loading...