23
BEFORE TESTING
CLEVER CHOICE Control Solution contains a known amount of
glucose that reacts with test strips and is used to ensure your meter
and test strips are working together correctly.
Do a control solution test when:
you rst receive the meter,
at least once a week to routinely check the meter and test strips,
you begin using a new vial of test strips,
you suspect the meter or test strips are not working properly,
your blood glucose test results are not consistent with how you
feel, or if you think the results are not accurate,
practicing the testing process, or
you have dropped or think you may have damaged the meter.
Control Solution Testing
To Next Page
Loading...