To Next PageTo Next PageHow to fix impeller blockage/debris in CLEVERSPA 180CM CIRCULAR Hot Tub?
To address an impeller blockage or debris issue in your CLEVERSPA Hot Tub: 1. Turn off the hot tub at the mains. 2. Drain the water from the hot tub. 3. Remove the filter and protective filter cover. 4. Perform a visual check of the outlet inside and out, looking for anything that may be obstructing the water flow.
Addresses drowning risks and general user safety guidelines.
Important warnings for user safety and product operation.
General cautions for safe usage, chemical handling, and health considerations.
Guidance on managing water during draining, cleaning, and overflow.
Instructions for fitting, using, and storing the hot tub's top cover.
Advice for installing the spa considering local environmental conditions.
Considerations for ventilation, dehumidification, and floor materials for indoor setups.
Steps for connecting and powering on the LED lighting system.
Details on using the remote control to manage LED lighting modes and colors.
Diagram and instructions for wiring the LED light strip, receiver, and power converter.
How to activate and manage the air jet system and inflation process.
Instructions for adjusting and locking the spa's water temperature settings.
Details on activating and managing the heating system and its auto-shutoff.
How to use the filter, understand the FC code, and the filter cycle.
Explanation of the freeze protection feature and its activation.
Steps for first-time use, including chemically 'shocking' the water.
Advice for dealing with limescale build-up in hard water areas.
Instructions on cleaning, patching punctures, and general spa maintenance.
Procedures for draining, deflating, and proper storage of the hot tub.
Guidance on achieving correct inflation and identifying over-inflation.
Criteria and indicators for knowing when to replace the filter cartridge.
Methods and recommendations for cleaning CleverSpa filter cartridges.
Explanation of FC and HL error codes, their causes, and troubleshooting steps.
Explanation of SH and SL error codes, their causes, and troubleshooting steps.
Diagnosing and resolving common issues like jet system, heating, and filtering problems.
Coverage periods for pump heater, cover, and liner, including extended options.
Instructions for registering your product and submitting a warranty claim.
How to contact the CleverSpa Aftersales Team for assistance.
Instructions for returning the product purchased from retailers or directly.
Consumer rights for cancelling orders and returning unused goods within 14 days.
Procedures for returning defective, incorrect, or damaged items.
Clever Company's disclaimer regarding user error, misuse, or damage.
General| Product Name | CLEVERSPA 180CM CIRCULAR |
|---|---|
| Category | Hot Tub |
| Shape | Circular |
| Diameter | 180 cm |
| Water Capacity | 800 Litres |
| Heating System | Rapid Heating System |
| Max Water Temperature | 40°C |
| Inflatable Material | Durable PVC |
| Power Supply | 220-240V, 50Hz |
| Setup Time | 5 minutes |
| Heat Up Speed | 1.5-2°C per hour |
| Max User Capacity | 6 |
| Included Accessories | Cover, Repair Kit |
