Clevo E4120 - Page 43

Disassembly
Removing the LCD Back Cover (for E4121D-C only) 2 - 19
2.Disassembly
6. Align the replacement cover with the dotted line as illustrated below (and as marked on the cover).
7. Slide the back cover forward until it clicks firmly into place .
8. Run your hands around the sides and front of the cover to make sure it is firmly aligned in place (carefully press
down to make sure the fit is secure).
9. Replace the screws and rubber covers.
8
8
9
9
10 10
10
d.
Figure 15
LCD Back Cover
Removal (cont’d)
d. Align the replacement
cover and slide forward to
click firmly into place.
9
10