Modules & Options
6 - 24 IR Camera
6
6. Click
Get Started
and the Windows Hello Setup Wizard will then guide you through the
set up process to scan your face.
7. You will need to key in the pin number on initial setup.
8. Before the scanning process begins, once again note:
• The system is powered by the AC/DC adapter (if the system is powered by the bat-
tery then facial recognition will not work).
• If you are a glasses wearer then it is recommended that you remove your glasses in
order to prevent reflection problems hampering the facial recognition system.
Figure 6 - 16
Windows Hello
Setup (Get Started &
Enter PIN)
To Next Page
Loading...
